• Cedar Textured Cement Lap Siding

    Cement lap siding gives the durability needed against the harshest weather climates.  This siding gives a realistic wood grain and texture to your cement siding, providing beauty with durability for your home.  Developed with advance technology  to endure the harshest weather and high winds. Cedar Siding is: Resistant to damage from termites; Water and hail […]

    More Info

  • 2×4 YP FlamePro Fire-Retardant Lumber

    2×4 YP FlamePro Fire-Retardant Lumber is made with yellow pine lumber and sold by the piece and comes in 8′, 10′ and 12′ lengths.  Boards are S4S where both sides and edges are planed smooth.  Actual board dimension is 1-1/2″ thick by 3-1/2″ wide. FlamePro lumber is chemically pressure-treated to reduce the spread of flames […]

    More Info

  • Fire-Retardant Interior CDX Plywood

    Fire-Retardant Interior CDX Plywood is chemically pressure-treated to reduce the spread of flames and generation of smoke.  In the event of a fire, this plywood will not spread fire and develops less smoke. Plywood can be either Flame-Pro brand or Pyroguard made by Hoover.  Plywood may be substituted for materials classified as non-combustible in certain […]

    More Info
  • Sale!

    2×4 Rough WR Cedar

    2×4 Rough WR Cedar is sold by the linear foot.  This Western Red Cedar is unfinished and naturally resistant to rot and decay. Often used for garden beds, landscape timbers and other rustic outdoor projects, this board is a #2 grade, left wet and rough.  Actual board dimension estimates at 1-7/8″ thick by 3-7/8″ wide. […]

    $2.89
    More Info

  • 1×4 KDAT Treated Lumber

    Our 1×4 KDAT Treated Lumber is a D&Better grade.  The D&Better grade means that one side should be fairly clear with only an occasional small or pin knot.  This lumber is re-dried down to a 19% moisture rate, ready to be stained or primed. Sold by the board in 8′, 10′, 12′ and 16′ lengths. […]

    More Info
  • Sale!

    2×12 Rough WR Cedar

    This 2×12 Rough WR Cedar is sold by the linear foot.  Often used for garden beds, landscape timbers and other rustic outdoor projects, this board is a #2 grade, left wet and rough.  Actual board dimension estimates at 1-7/8″ thick by 11-7/8″ wide.  Timbers are 8′ to 20′ in length.  This stock is sold by […]

    $12.89
    More Info
  • Sale!

    5/4 x 6 Cypress, Select S1S2E

    Our 5/4 x 6 Cypress is sold by the linear foot.    Kiln-dried and select D grade.  There could be an occasional pin knots and other imperfections, but most boards are pretty clear.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is […]

    $6.29
    More Info
  • Sale!

    Ipe Hardwood Decking 1×6

    Due to the strength and hardness of Ipe, a thinner decking can be used for 16″ on center joist spacing.  Also used for outdoor furniture, arbors and other outdoor living projects.  Ipe 1×6 decking actual size is 3/4″ x 5-1/2″ with an eased edge. Ipe hardwood comes from South America. Ipe is a very strong, […]

    $6.39
    More Info
  • Sale!

    CEDAR DECKING

    Our CEDAR DECKING is made with Western Red Cedar, a softwood known for its stability, straight grain and durability in exterior climates. This lumber is naturally resistant to rot and decay without any treatment. Western Red Cedar is normally reddish-brown in color. This wood ages to a natural silver-gray color when left unfinished outdoors. Western […]

    $22.97 – $57.58
    More Info
  • Sale!

    2×6 Rough WR Cedar

    2×6 Rough WR Cedar is a #2 grade and sold by the linear foot.  Western Red Cedar is often used for garden beds, landscape timbers and other rustic outdoor projects, this board is a #2 grade, left wet and rough.  Actual board dimension estimates at 1-7/8″ thick by 5-7/8″ wide.  Timbers are 8′ to 20′ […]

    $4.49
    More Info

  • 1×2 WR Cedar Select S1S2E

    Our 1×2 Western Red Cedar is sold by the linear foot.   Kiln-dried and STK graded (Select Tight knot) allowing for tight knots and graded on the rough side.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as being […]

    More Info

  • 1×10 WR Cedar A&Better S1S2E

    This 1×10 Western Red Cedar is sold by the linear foot.   Kiln-dried and clear A&Better grade.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as being exposed, but both sides are clear.  Actual board dimension is 3/4″ thick by […]

    More Info

  • 2×6 Premier KDAT Treated Lumber

    These 2×6 Premier KDAT Treated Lumber boards are a Premier grade, a step up from the Select #1 grade.  This board has tighter growth rings for more stability and strength over the select #1 grade.  It also has smaller and less knots for a more finished face.  Boards are S4S where both sides and edges […]

    More Info

  • 2×4 Premier KDAT Treated Lumber

    Our 2×4 Premier KDAT Treated Lumber boards are a Premier grade, a step up from the Select #1 grade.  This board has tighter growth rings for more stability and strength over the select #1 grade.  It also has smaller and less knots for a more finished face.  Boards are S4S where both sides and edges […]

    More Info

  • OSB Board

    Oriented Strand board is made of wood chips and interior resin. It is mainly used for interior wall sheathing.  Available in 7/16″ thickness only. Sold by the full 4’x8′ sheets only.

    More Info

  • 2×6 FlamePro Fire-Retardant Lumber

    2×6 FlamePro Fire-Retardant lumber is made with Yellow Pine lumber and sold by the piece and comes in 8′, 10′ and 12′ lengths.  Boards are S4S where both sides and edges are planed smooth.  Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. FlamePro lumber is chemically pressure-treated to reduce the spread of flames and […]

    More Info