• 1×4 WR Cedar A&Better S1S2E

    This 1×4 Western Red Cedar is sold by the linear foot.   Kiln-dried and clear A&Better grade.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as being exposed, but both sides are clear.  Actual board dimension is 3/4″ thick by […]

    More Info
  • Sale!

    1×4 Cypress, Select S1S2E

    Our 1×4 Cypress is sold by the linear foot.    Kiln-dried and select D grade.  There could be an occasional pin knots and other imperfections, but most boards are pretty clear.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as […]

    $2.49
    More Info

  • 1×8 Doug Fir, Clear S4S

    Our 1×8 Doug Fir is sold by the board.   Kiln-dried and clear grade with just an occasional pin knot.  This material is S4S where both sides and edges are planed smooth.  Boards come in lengths 8′ through 20′ lengths.  Actual board dimension is 3/4″ thick by 7-1/4″ wide. Quantity discount tier pricing is available on all orders over 50, […]

    More Info

  • 2×2 WR Cedar Clear S4S

    Our 2×2 Western Red WR Cedar is sold in 8′ lengths only.   Kiln-dried in a D & better grade.  This material is S4S meaning both sides and edges are planed smooth. The actual board dimension is 1-1/2″ thick by 1-1/2″ wide. Quantity discount tier pricing is available on all orders over 50, 100 and […]

    More Info

  • Old Timey #143 Beveled Pattern Siding

    This Lap siding is made out of C&Better graded Yellow Pine. It measures ¾” thick by 9” wide. It is recommended to prime all sides before installation with an exterior grade primer.  Then caulk and paint product after installation with an exterior grade product.

    More Info

  • 1×6 WR Cedar Select S1S2E

    This 1×6 Western Red Cedar is sold by the board.   Kiln-dried and STK graded (Select Tight knot) allowing for tight knots and graded on the rough side.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as being […]

    More Info

  • 1×4 Clear White Pine Lumber, S4S

    Our 1×4 Clear White Pine (aka Radiata Pine) lumber is sold by the linear foot and comes in random lengths up to 16′.  Boards are S4S where both sides and edges are planed smooth.  Actual board dimension is 3/4″ thick by 3-1/2″ wide.  

    More Info

  • 4×4 #1 GC Timbers

    Our 4×4 #1 GC Timbers have a #1 grade and are treated to withstand below-ground exposure.  This #1 grade allows for up to medium knots, wane and other imperfections.  There will be fewer knots and smaller in size than in the #2 grade.  It is sold by the board in 8′, 10′ and 12′ lengths. […]

    More Info

  • Primed MDF Interior 6″ & 8″ Shiplap Gap Siding

    Primed MDF Gap shiplap pattern siding for interior application.  This siding makes a nickel-slot size gap when installed. Special order in 1×6 and 1×8 sizes.  Available in 16′ lengths only.

    More Info

  • 1×12 Clear Doug Fir S4S

    1×12 Clear Doug Fir S4S is sold by the board.   Kiln-dried and clear grade with just an occasional pin knot.  This material is S4S where both sides and edges are planed smooth.  Boards come in lengths 8′ through 20′ lengths.  Actual board dimension is 3/4″ thick by 11-1/4″ wide. Quantity discount tier pricing is […]

    More Info

  • MDO – Medium Density Overlay, Signboard

    MDO, also known as Signboard, is an exterior-grade plywood with a high-quality fiber surface saturated with phenolic resin solids.  The plywood below the fiber face is smooth, clear and free of patches, providing a smooth surface with minimal grain showing through.  MDO plywood is water-proof and weather-resistant.  This plywood is often used for exterior signs.  MDO plywood can […]

    More Info

  • 1×12 WR Cedar Select S1S2E

    This 1×12 Western Red Cedar is sold by the board.   Kiln-dried and STK graded (Select Tight knot) allowing for tight knots and graded on the rough side.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as being […]

    More Info

  • 6×6 Marine Grade Treated Timbers

    Our 6×6 Marine Grade Treated Timbers are either a #1 or #2 grade and below-ground Wolmanized® CCA-Treated for fresh-water marine exposure.  The #1 and #2 grade allows for knots, wane and other imperfections.  Available in 8′, 10′, 12′ and 16′ lengths.   Timbers are surfaced on all sides.  Actual timber dimension is 5-1/2″ thick by […]

    More Info
  • Sale!

    1×6 Cypress, Select S1S2E

    Our 1×6 Cypress is sold by the linear foot.    Kiln-dried and select D grade.  There could be an occasional pin knots and other imperfections, but most boards are pretty clear.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as […]

    $5.39
    More Info

  • 1×4 WR Cedar Select S1S2E

    This 1×4 Western Red Cedar is sold by the board.   Kiln-dried and STK graded (Select Tight knot) allowing for tight knots and graded on the rough side.  This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth.  The rough side is often preferred as being […]

    More Info

  • 1×10 Knotty White Pine Lumber, S4S

    Our 1×10 Knotty White Pine lumber is sold by the board in 8′ to 16′ lengths.  Boards are a #2 grade and usually have knots allowing for a more rustic look.  Boards are S4S where both sides and edges are planed smooth.  Actual board dimension is 3/4″ thick by 9-1/4″ wide.  

    More Info