• #2 YP Reversible V-Flat 6″ Ceiling / Flooring / Paneling

    Reversible T&G in a #2 Yellow Pine for a more economical choice.  Front face is vee’d at the edges and the back face is flat.  This T&G can be used as Ceiling, Flooring or Paneling. T&G  is 3/4″ thick and available in 5-1/2″ total width only.  Sold by the linear foot.

    More Info

  • Aromatic Cedar T&G Closet Paneling

    Unfinished Aromatic Cedar paneling.  Protects wool clothing and adds freshness to a closet and drawers with its aromatic scent.  Easy to install with all boards tongue and grooved on sides and ends.  Boards are 1/4″ thick and 3-3/4″ wide with random lengths up to 48″ long. Sold by the pack.  Each pack includes of 15 sqft […]

    More Info
  • Sale!

    Charred Interior Shiplap Siding – 1″ X 6″

    Create an accent wall with these charred shiplap boards.  The surface is carefully burnt to highlight the natural grain.  Once charred, each board is sealed with a clear satin finish.  These boards also bring a nice rustic look to ceilings, signs, and other DIY projects.  Boards measure 1″ x 6″ (actual 5/8″ x 5-1/4″) and are […]

    $3.09 $1.57
    More Info

  • Knotty WP Reversible 8″ Rustic Shiplap Paneling

    Reversible shiplap in a Knotty White Pine.  Front face is combed for a rustic look and the back face is smooth surfaced.  Can fit tight for no groove or leave a 1/8″ gap for a nickel slot appearance. T&G  is 3/4″ thick and available in 7-1/2″ total width only.  Sold by the linear foot.

    More Info

  • Pecky Cypress 6″ T&G Paneling

    Give your ceilings or walls more character with a pecky finish.  Ideal for a more rustic look.  Great for ceilings, walls and accent walls too.  This pecky appearance takes years for nature to create.  Pockets of swamp cypress sometimes is attacked by a fungus that leaves this “pecky” characteristic in the wood.  The decay caused by […]

    More Info

  • Pre-Finished 1×6 Interior Shiplap Gap Siding

    Awesome shiplap siding in 4 beautiful colors for interior application.  This siding makes a nickel-slot size gap when installed.  Available in 1×6 shiplap in 12′ and 16′ lengths.  Also available in 1×4 s4s trim in all colors.  This item is ordered in as needed, please allow 1 week turn-around time.  Samples available at store or contact […]

    More Info

  • Pre-finished E-Peck® Interior T&G Paneling

    Give your ceiling or walls more character with a pecky finish.  Ideal for a more rustic look.  This e-Peck® process by Synergy Wood duplicates the pecky appearance that takes years in nature to create.  Available in Cypress, Ponderosa Pine or Southern Yellow Pine.  Each plank is hand-finished with a bevel edge on sides and ends of […]

    More Info

  • Pre-finished Interior T&G Paneling

    Beautiful Synergy Wood pre-finished T&G paneling with a v’eed edge for your ceiling or walls.  Choose from 5 beautiful artisan colors.  Available in Cypress, Ponderosa Pine or Southern Yellow Pine.  Grade is #2 allowing for that natural rustic look with knots present.  Each plank is hand-finished with a V-eed edge on sides and ends of boards for […]

    More Info

  • Primed MDF Interior 6″ & 8″ Shiplap Gap Siding

    Primed MDF Gap shiplap pattern siding for interior application.  This siding makes a nickel-slot size gap when installed. Special order in 1×6 and 1×8 sizes.  Available in 16′ lengths only.

    More Info

  • Primed or Pre-finished Rustic Soffit Paneling 1″ x 6″

    RealSoffit™ by Woodtone Measures 1″ thick by 6″ wide 14 feet long bundles of 6 End-matched tongue & groove for easier installation with less waste V-joint Made from Lodgepole Pine, appearance grade Available in their Hybrid Alkyd Emulsion™ primer  or 6 pre-stained colors Gloss clearcoat is also available Can be used as an exterior ceiling […]

    More Info

  • T&G Clear YP Reversible V-Flat Ceiling / Flooring / Paneling

    Reversible T&G in clear C&Better Yellow Pine.  Front face is vee’d at the edges and the back face is flat.  This T&G can be used as Ceiling, Flooring or Paneling. Available in 3-1/2″ and 5-1/2″ total widths and 3/4″ thick.  Sold by the linear foot.

    More Info

  • T&G Knotty White Pine Paneling / Ceiling

    Reversible T&G in knotty White Pine.  Front face is a center and edge bead and the back face is vee’d at the edges.  This T&G can be used as Ceiling or Paneling. T&G is 3/4″ thick and available in 3-1/2″ only.  Sold by the linear foot.  Tier discounts available starting at 150 lft.

    More Info

  • T&G KWP Double Beaded Paneling / Ceiling

    Reversible T&G in knotty white pine.  Front face is a center and edge bead and the back face is vee’d at the edges.  This T&G can be used as Ceiling or Paneling. T&G is 3/4″ thick and available in 5-1/2″ width only.  Sold by the linear foot.  Tier discounts available starting at 150 lft.

    More Info

  • T&G Oak Double Bead Wainscot

    T&G paneling in unfinished Red Oak hardwood.  Boards are 5/16″ thick and 3-1/8″ wide.  Sold in 6-board packs in a 32″ for a knee wall or 96″ length for an 8′ ceiling room. This product is available in stock at our store and through TotalWoodStore online soon.  Pricing online could vary from in-store pricing.    

    More Info

  • T&G Pickwick Knotty White Pine Paneling

    Reversible T&G paneling in Knotty White Pine.  Front face has a pickwick pattern and back face has a Vee’d edge. T&G is 3/4″ thick and available in 5-1/8″, 6-7/8″ and 8-7/8″ face widths.  Sold by the linear foot.  Tier discounts available starting at 150 lft.  This product is available in stock at our store and through […]

    More Info

  • T&G Select Cedar Rough Paneling / Ceiling

    Reversible T&G paneling in Select Tight Knot Western Red Cedar.  Both faces have a ‘V’ Edge.  Front face is left rough for a more rustic look.  Back face is planed smooth.  Graded to the rough face, but either face can be used.  This Cedar T&G is an ideal choice to be used in protected exterior […]

    More Info