LP SmartSide Reversible Textured Engineered Wood Cedar Shake Siding
LP Smartside Reversible Cedar Texture Shake Siding delivers the authentic look of cedar shakes with the dimensional stability and durability of engineered wood. Each primed panel features a realistic cedar texture on both faces so you can install the decorative side outward for natural shake appearance or flip for a more subtle grain. Panels are factory-primed for consistent paint adhesion and fast job-site finishing.
– Sold in packs of 10.
– Primed, 3/8″ x 12″ x 4′ (Pack of 10)
– (Actual panel size: 0.354″ x 11.625″ x 48.63″)
Additional Information
Key Features & Benefits
- Authentic look: Realistic cedar shake texture replicates traditional wood shake aesthetics.
- Reversible design: Two textured faces provide installation flexibility and matching options.
- Engineered durability: Manufactured to resist splitting, cracking and swelling better than raw wood.
- Primed, ready to finish: Factory-applied prime coat ensures even paint coverage and improved adhesion, reducing onsite prep time.
- Dimensional consistency: Precision manufacturing (actual size 0.354″ x 11.625″ x 48.63″) for uniform joints and easier installation.
- Weather resistance: When finished and installed per manufacturer recommendations, resists moisture-related issues common to natural wood.
- Workability: Cuts, nails and routes like wood, compatible with common carpentry tools and fasteners.
- Packaged for convenience: Sold in packs of 10 for streamlined ordering and job estimating.
Technical Specs
- Nominal size: 3/8″ x 12″ x 4′
- Actual size: 0.354″ x 11.625″ x 48.63″
- Finish: Factory-primed (unpainted)
- Sold: Packs of 10
Please inquire at counter for discount pricing on bulk orders.
General Installation Guidelines:
- Jobsite & Storage: Store flat, off the ground, under cover. Acclimate boards in the conditioned jobsite area for 24–48 hours if possible. Protect panels from prolonged exposure to moisture prior to installation.
- Substrate & Sheathing: Install over a code-compliant sheathing with an approved weather-resistive barrier (housewrap). Ensure proper flashings at windows, doors, and penetrations. Provide a minimum 1/8″ gap at vertical butt joints and around openings per manufacturer guidance.
- Fasteners: Use corrosion-resistant nails (galvanized, hot-dipped, or stainless) sized per local code and LP recommendations. Space fasteners evenly and follow recommended setback from edges to avoid splitting. Do not overdrive nails; panels should be seated firmly without crushing the face.
- Seam & Joint Treatment: Stagger end joints and maintain recommended gaps. Use proper trim and flashings at terminations. Back-prime cut edges with compatible primer to maintain moisture resistance.
- Painting & Finishing: Finish with high-quality exterior primer and topcoat compatible with engineered wood. Follow paint manufacturer’s recommendations for number of coats, sheen, and recoat times. Do not leave primed panels exposed uncoated for extended periods.
- Thermal Movement & Expansion: Allow for recommended expansion gaps and follow lap/overlap spacing guidelines. Avoid continuous vertical runs without proper movement joints as specified by manufacturer.
- Cutting & Field Modifications: Seal cut edges with recommended primer/sealer. Use carbide-tipped blades for clean cuts.
- Maintenance: Inspect finishes and flashing periodically. Repaint or touch up as needed to maintain long-term performance.
Note: These are general guidelines. Always follow LP SmartSide manufacturer installation instructions, local building codes, and paint manufacturer recommendations for best results.
