-
Marine grade unfinished Okoume plywood or Aquatek Meranti Marine plywood. Marine grade plywood has solid plys with no voids and a pholic exterior glue. This plywood is not treated. Full 4×8 sheets are available in stock at our location in 1/2″ and 3/4″. We also have a limited selection of partial redi-cut 2’x4′ sheets in stock. All […]
-
Hechthout® Okoume Marine Plywood is one of the nicest marine grade plywoods around. Very weather and water proof, Okoume Marine plywood has been used for construction and boatbuilding for decades. The Hechthout® Okoume Marine Plywood with an A grade surface on both sides allowing for a clear-face. This allows for a solid, no void piece […]
-
RUST-OLEUM® Marine Coatings Spar Varnish Use on wood surfaces above waterline Can be used on previously finished surfaces Roll or brush on Provides a clear finish Available in Quart size only
-
RUST-OLEUM® Marine Coatings Primer Use on wood or fiberglass surfaces above waterline Can be used on previously painted surfaces Spray, roll, or brush on Dries quickly Available in Quart size can
-
Sale!
$54.69 – $180.69
Unfinished Baltic Birch marine plywood whole-piece face veneer plywood in thicknesses from 6mm or 1/4″ to 24mm or a full 1″ in six different thicknesses. This plywood is graded BB/CP and has ALL BIRCH solid inner plies with no voids for durability and strength. It is constructed with exterior pholic resin glue. This is a […]
-
Our 8×8 Marine Grade Treated Timbers have a rough surface. Left rough on the face and graded #2. This timber has below-ground CCA treatment for fresh-water marine environment. This grade allows for knots, wane and other imperfections. It is sold by the board in 10′, 12′ and 16′ lengths. Actual board dimension is 7-3/4″ thick […]
-
Our 6×6 Marine Grade Treated Timbers are either a #1 or #2 grade and below-ground Wolmanized® CCA-Treated for fresh-water marine exposure. The #1 and #2 grade allows for knots, wane and other imperfections. Available in 8′, 10′, 12′ and 16′ lengths. Timbers are surfaced on all sides. Actual timber dimension is 5-1/2″ thick by […]
-
Douglas Fir wood Veneer. Douglas Fir, also called Oregon Pine or blue Douglas fir, is grown in Colorado, Oregon, the Rocky Mountains among other US states and in Canada. Douglas Fir is known for its straight grain and stability. The tight growth rings are quite visible and produce uniform straight to wavy lines. It is […]