• Oak, Red Quartered Wood Veneer

    Red Oak Wood Veneer in a quartered cut.  The color ranges from light to medium brown, commonly with a reddish cast. Grain is straight, with a coarse, uneven texture. Red oak is often used for furniture, cabinet making, trim, and any other project you want to add the natural look of real wood.  Ready to be […]

    More Info

  • Oak, Red, Hardwood S2S

    Oak, Red, Hardwood S2S Red Oak S2S hardwood is stocked in 4/4, 5/4, 6/4 and 8/4 thicknesses.   Skip surfaced on both faces, left rough on the edges, and sold by the board foot.  The widths and lengths can vary by board. JANKA HARDNESS SCALE:  1290

    More Info

  • Oak, White Hardwood Rough

    Oak, White Hardwood Rough Rough White Oak hardwood is stocked in 10/4 thickness only. Nets close to 2-1/2″ thick. JANKA HARDNESS SCALE:  1360

    More Info

  • Oak, White Hardwood S2S1E

    Oak, White Hardwood S2S1E White Oak S2S1E hardwood has been surface planned to a unique thickness and one side is trued and square.   The other edge is left rough and therefore; there can be up to a 1″ variance in the width of the board. Available in 4/4 or 8/4 thickness, 3″ to 5″ wide, […]

    More Info

  • Oak, White Hardwood S4S

    Oak, White Hardwood S4S White Oak Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried.  This board is more finished than our S2S1E boards and cut from our S2S material. Although surfaced, additional dressing and sanding of the boards may be needed to complete your project. Stocked in 1×4, 1×6 and 1×8 in random lengths up […]

    More Info

  • Oak, White Qtr-Sawn Hardwood S2S

    Oak, White Qtr-Sawn Hardwood S2S Domestic White Oak S2S hardwood in a Quarter Sawn cut.  This hardwood is stocked in 4/4 thickness only.   Skip surfaced on both faces, left rough on the edges, and sold by the board foot.  The widths and lengths can vary by board. JANKA HARDNESS SCALE:  1360

    More Info

  • Oak, White, Spessart Full-Boule Hardwood S2S

    Oak, White, Spessart Full-Boule Hardwood S2S European White Oak Spessart hardwood in a full-boule cut with a “Live Edge”.  Each of our Live Edge boule slabs are unique in shape, character and size.  This is a through the log slice that can contain bark on the edges.  This hardwood is stocked in 4/4 thickness and sold […]

    More Info

  • Okoume Marine Plywood

    Okoume Marine Plywood Okoume Marine Plywood (also sold as Aquatek Meranti Marine plywood when stock varies) is a high-quality, unfinished marine-grade panel engineered for demanding exterior and marine applications. Manufactured with solid plies, void-free construction, and a phenolic exterior glue, this plywood delivers consistent strength, stability, and a smooth, sanded finish—ready for finishing, laminating, or […]

    More Info

  • Old Timey #143 Beveled Pattern Siding

    Old Timey #143 Beveled Pattern Siding This beveled pattern siding is made out of C&Better graded Yellow Pine. It measures ¾” thick by 9-1/4” wide. Last 3 inches bevel down to a 5/16″ thickness. It is recommended to prime all sides before installation with an exterior grade primer.  Then caulk and paint product after installation […]

    More Info

  • OSC Block [1-1/4″ x 1-1/4″ x 6″]

    OSC Block (1-1/4″ x 1-1/4″ x 6″) This Outside Corner Block is available in Solid Red Oak and Clear White Pine.  This item is sold individually.  

    More Info

  • OUTLAST Q8 Wood Preservative

    OUTLAST Q8 Wood Preservative OUTLAST Q8 Wood Preservative to improve the Life of your exterior wood project.  When cutting your treated decking boards or treated lumber, be sure to coat or spray the cut ends with OUTLAST Q8 Log Oil.  Can also be used on non-treated lumber like doug fir, white pine, cedar and cypress […]

    More Info

  • Outside Aluminum Hardboard Siding Corners

    Outside Aluminum Hardboard Siding Corners are designed to protect and enhance the outside corners of your house. Made from primed aluminum, these siding corners come in either woodgrain or smooth finishes and measure 7/16″ thick for durability. The corners measure 1-1/8″ at the top and 1-3/4″ at the bottom, providing a clean and seamless finish. […]

    More Info

  • Oversized Marine Plywood in 60″x120″ (5’x10′)

    Oversized Marine Plywood — 5′ x 10″ panel (3/4″) for boatbuilding, outdoor furniture, cabinetry, and heavy-duty projects. High-grade Baltic Birch marine plywood manufactured from Baltic silver birch. Oversized 5′ x 10′ panels with 3/4″ thickness provide exceptional strength, stability, and moisture resistance for demanding marine and exterior applications. Whole-piece face veneer, BB/CP grade, solid birch […]

    More Info

  • Padauk Hardwood Rough

    Padauk Hardwood rough Padauk Hardwood is stocked in 4/4 and 8/4 thickness.  Rough cut and sold by the board foot.  The widths and lengths can vary by board. JANKA HARDNESS SCALE:  1725

    More Info

  • Padauk Hardwood S2S1E

    Padauk Hardwood S2S1E Padauk S2S1E hardwood has been surface planned to a unique thickness and one side is trued and square.   The other edge is left rough and therefore; there can be up to a 1″ variance in the width of the board. Available in 4/4 or 8/4 thickness, 3″ to 5″ wide, and 3′ […]

    More Info

  • Padauk Hardwoods S4S

    Padauk Hardwoods S4S S4S means this hardwood has been surfaced on all four sides. This board has a cleaner appearance than S2S1E. Available in 4/4 or 8/4 thickness, 1-1/2″ to 5-1/2″ wide, and 3′ to 8′ long.

    More Info