-
Oak, Red Hardwood S4S
More InfoOak, Red Hardwood S4S Red Oak S4S hardwood is stocked in 3/4″ thick boards in widths from 2″ to 12″. Clean dressed on all four sides with square edges. Lengths can vary and sold by the linear foot. JANKA HARDNESS SCALE: 1290
-
Oak, Red Plain Sliced Wood Veneer
More InfoRed Oak Wood Veneer in a Plain-Sliced cut, also called flat-cut. The color ranges from light to medium brown, commonly with a reddish cast. Grain is straight, with a coarse, uneven texture. Red oak is often used for furniture, cabinet making, trim, and any other project you want to add the natural look of real wood. […]
-
Oak, Red Quartered Wood Veneer
More InfoRed Oak Wood Veneer in a quartered cut. The color ranges from light to medium brown, commonly with a reddish cast. Grain is straight, with a coarse, uneven texture. Red oak is often used for furniture, cabinet making, trim, and any other project you want to add the natural look of real wood. Ready to be […]
-
Oak, Red, Hardwood S2S
More InfoOak, Red, Hardwood S2S Red Oak S2S hardwood is stocked in 4/4, 5/4, 6/4 and 8/4 thicknesses. Skip surfaced on both faces, left rough on the edges, and sold by the board foot. The widths and lengths can vary by board. JANKA HARDNESS SCALE: 1290
-
Oak, White Hardwood Rough
More InfoOak, White Hardwood Rough Rough White Oak hardwood is stocked in 10/4 thickness only. Nets close to 2-1/2″ thick. JANKA HARDNESS SCALE: 1360
-
Oak, White Hardwood S2S1E
More InfoOak, White Hardwood S2S1E White Oak S2S1E hardwood has been surface planned to a unique thickness and one side is trued and square. The other edge is left rough and therefore; there can be up to a 1″ variance in the width of the board. Available in 4/4 or 8/4 thickness, 3″ to 5″ wide, […]
-
Oak, White Hardwood S4S
More InfoOak, White Hardwood S4S White Oak Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried. This board is more finished than our S2S1E boards and cut from our S2S material. Although surfaced, additional dressing and sanding of the boards may be needed to complete your project. Stocked in 1×4, 1×6 and 1×8 in random lengths up […]
-
Oak, White Qtr-Sawn Hardwood S2S
More InfoOak, White Qtr-Sawn Hardwood S2S Domestic White Oak S2S hardwood in a Quarter Sawn cut. This hardwood is stocked in 4/4 thickness only. Skip surfaced on both faces, left rough on the edges, and sold by the board foot. The widths and lengths can vary by board. JANKA HARDNESS SCALE: 1360
-
Oak, White, Spessart Full-Boule Hardwood S2S
More InfoOak, White, Spessart Full-Boule Hardwood S2S European White Oak Spessart hardwood in a full-boule cut with a “Live Edge”. Each of our Live Edge boule slabs are unique in shape, character and size. This is a through the log slice that can contain bark on the edges. This hardwood is stocked in 4/4 thickness and sold […]
-
Okoume Marine Plywood
More InfoOkoume Marine Plywood Marine grade unfinished Okoume plywood or Aquatek Meranti Marine plywood. Marine grade plywood has solid plys with no voids and a pholic exterior glue. This plywood is not treated. Full 4×8 sheets are available in stock at our location in 1/4″, 3/8″, 1/2″ and 3/4″. We also have a limited selection of partial redi-cut […]
-
Old Timey #143 Beveled Pattern Siding
More InfoOld Timey #143 Beveled Pattern Siding This beveled pattern siding is made out of C&Better graded Yellow Pine. It measures ¾” thick by 9-1/4” wide. Last 3 inches bevel down to a 5/16″ thickness. It is recommended to prime all sides before installation with an exterior grade primer. Then caulk and paint product after installation […]
-
OSC Block [1-1/4″ x 1-1/4″ x 6″]
More InfoOSC Block (1-1/4″ x 1-1/4″ x 6″) This Outside Corner Block is available in Solid Red Oak and Clear White Pine. This item is sold individually.
-
OUTLAST Q8 Wood Preservative
More InfoOUTLAST Q8 Wood Preservative OUTLAST Q8 Wood Preservative to improve the Life of your exterior wood project. When cutting your treated decking boards or treated lumber, be sure to coat or spray the cut ends with OUTLAST Q8 Log Oil. Can also be used on non-treated lumber like doug fir, white pine, cedar and cypress […]
-
Outside Aluminum Hardboard Siding Corners
More InfoOutside Aluminum Hardboard Siding Corners are designed to protect and enhance the outside corners of your house. Made from primed aluminum, these siding corners come in either woodgrain or smooth finishes and measure 7/16″ thick for durability. The corners measure 1-1/8″ at the top and 1-3/4″ at the bottom, providing a clean and seamless finish. […]
-
Oversized Marine Plywood in 60″x120″ (5’x10′)
More InfoOversized Marine Plywood — 5′ x 10″ panel (3/4″) for boatbuilding, outdoor furniture, cabinetry, and heavy-duty projects. High-grade Baltic Birch marine plywood manufactured from Baltic silver birch. Oversized 5′ x 10′ panels with 3/4″ thickness provide exceptional strength, stability, and moisture resistance for demanding marine and exterior applications. Whole-piece face veneer, BB/CP grade, solid birch […]
-
Padauk Hardwood Rough
More InfoPadauk Hardwood rough Padauk Hardwood is stocked in 4/4 and 8/4 thickness. Rough cut and sold by the board foot. The widths and lengths can vary by board. JANKA HARDNESS SCALE: 1725
Products
