-
Sale!
2 x 6 Cypress, Select S4S
More InfoOriginal price was: $13.79.$9.79Current price is: $9.79.Our 2 x 6 Cypress is sold by the linear foot. Kiln-dried and select D grade. There could be an occasional pin knots and other imperfections, but most boards are pretty clear. This material is S4S meaning both sides and edges are planed smooth. Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. Boards are 8′ to 16′ […]
-
Hardie Textured Beaded Cement Lap Siding
More InfoJames Hardie cement lap siding gives the durability needed against the harshest weather climates. This siding was engineered for areas with hurricane-force winds, salty sea air of the coast, and the brutal, humid heat of the Deep South. Engineered specifically for these climates, HZ10™ boards resist cracking, splitting, rotting and swelling season after season. Choose […]
-
1×12 Clear Yellow Pine Lumber, S4S
More InfoOur 1×12 clear Yellow Pine lumber is sold by the board in 10′ to 16′ lengths. These boards are often times used for trim, furniture and other inside projects. Boards are a nice clear grade and S4S where both sides and edges are planed smooth. Actual board dimension is 3/4″ thick by 11-1/4″ wide.
-
2×10 Yellow Pine Lumber, #1 Grade, S4S
More InfoOur 2×10 #1 Yellow Pine Framer Series are sold in 10′, 12′ and 16′ lengths. Kiln-dried and #1 framing grade. This board is a more economical choice and often used for construction, rustic furniture making and bed frames. Boards are S4S where both side and edges are planed smooth. Actual board dimension is 1-1/2″ thick by 9-1/4″ wide. […]
-
1×6 #2 Yellow Pine Lumber, S4S
More InfoOur 1×6 #2 Yellow Pine lumber is sold in 16′ lengths only. These boards allow for knots, wane and other imperfections. A more economical and rustic looking board. These boards are often times used for trim, furniture and other inside projects. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is 3/4″ thick […]
-
1×4 Knotty White Pine Lumber, S4S
More InfoOur 1×4 Knotty White Pine lumber is sold by the board in 8′ to 16′ lengths. Boards are a #2 grade and usually have knots allowing for a more rustic look. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is 3/4″ thick by 3-1/2″ wide.
-
1×12 WR Cedar A&Better S1S2E
More InfoThis 1×12 Western Red Cedar is sold by the linear foot. Kiln-dried and clear A&Better grade. This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth. The rough side is often preferred as being exposed, but both sides are clear. Actual board dimension is 3/4″ thick by […]
-
Reclaimed Heart Pine Lumber
More InfoOur Reclaimed heart pine lumber is sold by the board foot. This pine has a lot of character. Heart pine lumber reclaimed from old warehouses, homes and businesses. May have nail holes and other characteristics ideal for that rustic look. Limited supply in stock. Thicknesses and widths may vary.
-
Miratec® Trim Boards
More InfoMiratec® Trim boards provides the beauty of authentic wood and the lasting performance of an engineered product. Miratec is not a hardboard and will not delaminate. Reversible with one smooth side and one wood grained textured side. Miratec provides: – Moisture resistant surface, – Rot and termite resistant, – Won’t warp, split or check, – […]
-
Mountain Pine Lap Siding
More InfoMountain Siding is white pine siding that has one side with exposed tree edge for a natural, uneven edge. The two faces are flat and other edge is square. Siding is typically 12″ and wider, but can vary from piece to piece and within a piece since one edge of siding is left uneven. Some […]
-
Hardie Smooth Beaded Cement Lap Siding
More InfoJames Hardie cement lap siding gives the durability needed against the harshest weather climates. This siding was engineered for areas with hurricane-force winds, salty sea air of the coast, and the brutal, humid heat of the Deep South. Engineered specifically for these climates, HZ10™ boards resist cracking, splitting, rotting and swelling season after season. Choose […]
-
Sale!
Birch, White, Plywood
More Info$29.79 – $49.99Birch, White, Plywood. Unfinished imported whole-piece veneer-faced plywood available in 1/4″, 1/2″ and 3/4″ thicknesses. This is a paint-grade plywood that has a C grade face that allows for subtle variations in wood and may contain some patching. Nice smooth face, perfect for painting. The back side is a 2 grade that is of same […]
-
2×12 GC KDAT Treated Lumber
More InfoOur 2×12 GC KDAT Treated Lumber is a #1 grade and below-ground treated. This grade allows for up to medium knots, wane and other imperfections. There will be fewer knots and smaller in size than in the #2 grade. It is sold by the board in 10′, 12′ and 16′ lengths. Boards are S4S […]
-
Hechthout® Okoume Marine Plywood
More InfoHechthout® Okoume Marine Plywood is one of the nicest marine grade plywoods around. Very weather and water proof, Okoume Marine plywood has been used for construction and boatbuilding for decades. The Hechthout® Okoume Marine Plywood with an A grade surface on both sides allowing for a clear-face. This allows for a solid, no void piece […]
-
Sale!
TREX TRANSCEND® Composite Decking
More InfoOriginal price was: $10.89.$6.99Current price is: $6.99.High performance beautiful composite Decking in Trex’s best line. Boards are made from 95% recyclable material. Deep wood grain pattern with tropical and earth-tone multi-chrome colors. Trex is fade, scratch, stain and mold resistant. Receive extra savings on our stocked colors in Spiced Rum and Havana Gold. Stocked in 12′ and 16′ lengths. Also available in 20′ […]
-
2×12 Doug Fir, Clear S4S
More InfoOur 2×12 Doug Fir is sold by the board. Kiln-dried and clear grade with just an occasional pin knot. This material is S4S where both sides and edges are planed smooth. Boards come in lengths 8′ through 20′ lengths. Actual board dimension is 1-1/2″ thick by 11-1/4″ wide. Quantity discount tier pricing is available on all orders over 50, […]
Products
