-
Sale!
$183.00 – $255.00
Our Commercial Utility poles, by Culpepper Wood Preserves ® are industrial strength and treated. Utility poles are manufactured with a 0.8 CCA treatment. Great protection against termites and fungi while keeping the wood attractive, clean, odorless, non-staining and safe to handle when used as recommended. The fixation which occurs during the treating process makes the […]
-
Our 1×6 Clear White Pine (aka Radiata Pine) lumber is sold by the linear foot and comes in random lengths up to 16′. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is 3/4″ thick by 5-1/2″ wide.
-
Pecky Cypress Paneling. Give your ceilings or walls more character with a pecky finish. Ideal for a more rustic look. Great for ceilings, walls and accent walls too. This pecky appearance takes years for nature to create. Pockets of swamp cypress sometimes is attacked by a fungus that leaves this “pecky” characteristic in the wood. […]
-
Our 2×4 Yellow Pine lumber is sold in 93″ studs, 8′, 10′, 12′ and 16′ lengths in #1 Grade. This grade still allows for knots and wane, but will have fewer and smaller knots than the #2 grade. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is a 1-1/2″ thick by 3-1/2″ […]
-
Sale!
$1.89
Reversible shiplap in a Knotty White Pine. Front face is combed for a rustic look and the back face is smooth surfaced. Can fit tight for no groove or leave a 1/8″ gap for a nickel slot appearance. T&G is 3/4″ thick and available in 7-1/2″ total width only. Sold by the linear foot. Clearance […]
-
Flat Jamb Interior Primed in 4-5/8″ width. This interior flat door jamb is made of finger-jointed white pine. It measures 5/8″ thick by 4-5/8″ wide. This is a paint-grade product, ready for primer and paint. Stocked in 16′ lengths and sold by the linear foot. Just purchase what your need for your project. Also sold […]
-
Reversible T&G paneling in Knotty White Pine. Front face has a pickwick pattern and back face has a Vee’d edge. T&G is 3/4″ thick and available in 5-1/8″, 6-7/8″ and 8-7/8″ face widths. Sold by the linear foot. Tier discounts available starting at 150 lft. This product is available in stock at our store and through […]
-
Reversible T&G in clear C&Better Yellow Pine. Front face is vee’d at the edges and the back face is flat. This T&G can be used as Ceiling, Flooring or Paneling. Available in 3-1/2″ and 5-1/2″ total widths and 3/4″ thick. Sold by the linear foot.
-
This 1×6 Western Red Cedar is sold by the linear foot. Kiln-dried and clear A&Better grade. This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth. The rough side is often preferred as being exposed, but both sides are clear. Actual board dimension is 3/4″ thick by […]
-
1×6 KDAT Treated Lumber is a D&Better grade. The D&Better grade means that one side should be fairly clear with only an occasional small or pin knot. This lumber is redried down to a 19% moisture rate. It is sold by the board in 8′, 10′, 12′ and 16′ lengths. Boards are S4S where both […]
-
Split rails are tapered and 11′ long. Rails can be poplar or southern yellow pine and treated for above-ground contact. These rails are designed to be used with the 2-hole and 3-hole Treated Split Rail Posts. WEATHERED Split Rails discounted down 20%, when in stock. Weathered Split rails available for in-store purchases only.
-
Sale!
$27.39
A #1 grade quality used railroad tie for landscape retaining walls, parking curbs stops, bordering and fence posts in a commercial setting. Nicer grade holds up better than our competitors. Used railroad ties are creosote treated hardwoods. Ideal for areas where vegetation and weeds are not wanted. Would NOT make a good border for vegetable/flower gardens and has […]
-
Cedar Split-Rails are made out of Western Red Cedar are designed to be used with our cedar split rail posts. Rails are notched to fit into the posts. Chose from 8′ and 10′ long rails. Western Red Cedar is naturally resistant to rot and decay and is more stable than Yellow Pine. Promotional pricing listed […]
-
Our 2×6 Yellow Pine lumber is sold in 8′, 10′, 12′ and 16′ lengths. Kiln-dried in a #1 frame saver grade. The #1 grade still allows for knots and wane, but will have fewer and smaller knots than the #2 grade. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is a 1-1/2″ […]
-
Unfinished clear yellow pine flooring in a C and better grade. Solid 3/4″ inch thick flooring with a square edge and recessed back. Comes in 5 different widths and sold by the linear foot. Flooring comes in random lengths from 8′ to 16’ lengths. Can choose a specific length or choose random footage.
-
Sale!
$6.89
Our 2×8 Rough WR Cedar is sold by the linear foot. Often used for garden beds, landscape timbers and other rustic outdoor projects, this board is a #2 grade, left wet and rough. Actual board dimension estimates at 1-7/8″ thick by 7-7/8″ wide. Timbers are 8′ to 20′ in length. This stock is sold by […]