• Padauk Hardwood S2S1E

    Padauk Hardwood S2S1E S2S1E means this hardwood has been partially dressed. Each board has been “skip” surfaced on both faces and then one edge cleaned. Skip surfaced can leave some rough areas on the board. The other edge is left rough and therefore, there can be a 1″ variance in the width of the board. […]

    More Info

  • Oak, White Hardwood S2S1E

    Oak, White Hardwood S2S1E S2S1E (surfaced 2 sides and 1 edge) Hardwoods are for the woodworker as the boards are partially dressed. Boards are skip surfaced on both faces with 1 edge clean-ripped. Skip surfaced cleans up most of the roughness to the board, but there could be an occasional rough patch on the faces of boards. Additional […]

    More Info

  • Mahogany Hardwood S4S

    Mahogany Hardwood S4S Mahogany Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried.  This board is more finished than our S2S1E boards and cut from our S2S material. Although surfaced, additional dressing and sanding of the boards may be needed to complete your project. Our Mahogany can come from central and northern South America or tropical African areas, […]

    More Info

  • Mahogany Hardwood S2S1E

    Mahogany Hardwood S2S1E S2S1E Kiln-dried (surfaced 2 sides and 1 edge) Mahogany Hardwood Lumber Boards that are partially dressed. Boards are “skip” surfaced on both faces with 1 edge clean-ripped. Skip surfaced cleans up most of the roughness to the board, but there could be an occasional rough patch on the faces of boards. Additional […]

    More Info

  • Jatoba (Brazilian Cherry) Hardwood S4S

    Jatoba (Brazilian Cherry) Hardwood S4S Jatoba (Brazilian Cherry) Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried.  This board is more finished than our S2S1E boards and cut from our S2S material. Although surfaced, additional dressing and sanding of the boards may be needed to complete your project. Jatoba, also called Courbaril, is found in the West Indies, […]

    More Info

  • Jatoba (Brazilian Cherry) Hardwood S2S1E

    Jatoba (Brazilian Cherry) Hardwood S2S1E S2S1E Kiln-dried (surfaced 2 sides and 1 edge) Jatoba (Brazilian Cherry) Hardwood Lumber Boards for Woodworkers. These boards are partially dressed. Boards are “skip” surfaced on both faces with 1 edge clean-ripped. Skip surfaced cleans up most of the roughness to the board, but there could be an occasional rough patch on […]

    More Info

  • Hickory Hardwood S4S

    Hickory Hardwood S4S  Hickory Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried.  This board is more finished than our S2S1E boards and cut from our S2S material. Although surfaced, additional dressing and sanding of the boards may be needed to complete your project. Hickory, a very hard and dense wood, is grown in Canada and USA.  Hickory […]

    More Info

  • Hickory Hardwood S2S1E

    Hickory Hardwood S2S1E S2S1E means this hardwood has been partially dressed. Each board has been “skip” surfaced on both faces and then one edge cleaned. Skip surfaced can leave some rough areas on the board. The other edge is left rough and therefore, there can be a 1″ variance in the width of the board. […]

    More Info

  • Birch Hardwood S4S

    Birch Hardwood S4S Natural Birch Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried. This board has a cleaner appearance than S2S1E. We carry unselect Birch, a mix of both white and red (natural) birch.  Boards can have a mix of white and natural birch in the same board.  It is often used for furniture, domestic wares, […]

    More Info

  • Birch Hardwood S2S1E

    Birch Hardwood S2S1E S2S1E means this hardwood has been partially dressed. Each board has been “skip” surfaced on both faces and then one edge cleaned. Skip surfaced can leave some rough areas on the board. The other edge is left rough and therefore, there can be a 1″ variance in the width of the board. […]

    More Info

  • Beech European Hardwood S4S

    Beech European Hardwood Beech Hardwood Lumber Boards – Surfaced S4S (surfaced four sides) and kiln-dried.  This board is more finished than our S2S1E boards and cut from our S2S material. Although surfaced, additional dressing and sanding of the boards may be needed to complete your project. Beech is grown in Central Europe and UK.  The color varies from whitish to […]

    More Info

  • Beech European Hardwood S2S1E

    Beech European Hardwood S2S1E means this hardwood has been partially dressed. Each board has been “skip” surfaced on both faces and then one edge cleaned. Skip surfaced can leave some rough areas on the board. The other edge is left rough and therefore, there can be a 1″ variance in the width of the board. […]

    More Info

  • Basswood Hardwood S4S

    Basswood Hardwood S4S S4S means this hardwood has been surfaced on all four sides. This board has a cleaner appearance than S2S1E. Available in 4/4 or 8/4 thickness, 1-1/2″ to 5-1/2″ wide, and 3′ to 8′ long.

    More Info

  • Basswood Hardwood S2S1E

    Basswood Hardwood S2S1E S2S1E means this hardwood has been partially dressed. Each board has been “skip” surfaced on both faces and then one edge cleaned. Skip surfaced can leave some rough areas on the board. The other edge is left rough and therefore, there can be a 1″ variance in the width of the board. […]

    More Info

  • Castine Hatteras Post Tops

    Castine Hatteras Post Tops Flat Post top with nice profile. Made from Western Red Cedar. Available for regular 4×4 post tops or 6×6 post tops. Choose a solid top or a center hole to add a decorative post finial.

    More Info

  • Pine Country Heart Bracket

    Pine Country Heart Bracket Unfinished pine heart bracket measuring 7″ X 7″. Decorative support for shelving. Ready to be stained or painted. Sold individually with mounting hardware.

    More Info