• Teak Hardwood S2S

    Teak S2S hardwood is stocked in 4/4, 5/4 and 8/4.   Skip surfaced on both faces, left rough on the edges, and sold by the board foot.  The widths and lengths can vary by board. The 8/4 thickness has been discontinued and available while supplies last. JANKA HARDNESS SCALE:  1000

    More Info

  • 1×12 Clear White Pine Lumber, S4S

    Our 1×12 Clear White Pine (aka Radiata Pine) lumber is sold by the linear foot and comes in random lengths up to 16′.  Boards are S4S where both sides and edges are planed smooth.  Actual board dimension is 3/4″ thick by 11-1/4″ wide.  

    More Info

  • White Pine Bevel Siding

    Looking for untreated White Pine bevel siding? This grade does allow for knots, but the knots should be tight and not fall out. This bevel lap siding has a rough face and is graded on this face. The back side is a skip-surfaced face and may be smooth or rough with imperfections. White Pine is […]

    More Info

  • Western Red Cedar Bevel Siding

    This is a plain cedar bevel siding or tapered lap siding made with a Western Red Cedar graded Select with tight knots. Western Red Cedar bevel siding is commonly used in outdoor projects as it is easy to install, resistant to rot, and looks beautiful. Cedar bevel siding is perfect for homes, cottages, and cabins […]

    More Info

  • Yellow Pine German Lap Siding

    Our German Lap Siding is made with a yellow pine graded D&Better. There may be occasional knots, but relatively clear. Yellow Pine is a durable wood that is often used outside but must be primed and painted to hold up to the exterior elements. Our German Lap Siding is not pressure-treated. It is recommended to […]

    More Info

  • 1×8 Knotty White Pine Lumber, S4S

    Our 1×8 Knotty White Pine lumber is sold by the board in 8′ to 16′ lengths.  Boards are a #2 grade and usually have knots allowing for a more rustic look.  Boards are S4S where both sides and edges are planed smooth.  Actual board dimension is 3/4″ thick by 7-1/4″ wide.  

    More Info

  • #2 YP Reversible V-Flat 6″ Ceiling / Flooring / Paneling

    Reversible T&G in a #2 Yellow Pine for a more economical choice.  Front face is vee’d at the edges and the back face is flat.  This T&G can be used as Ceiling, Flooring or Paneling. T&G  is 3/4″ thick and available in 5-1/2″ total width only.  Sold by the linear foot.

    More Info

  • T&G Select Cedar Rough Paneling / Ceiling

    Reversible T&G paneling in Select Tight Knot Western Red Cedar.  Both faces have a ‘V’ Edge.  Front face is left rough for a more rustic look.  Back face is planed smooth.  Graded to the rough face, but either face can be used.  This Cedar T&G is an ideal choice to be used in protected exterior […]

    More Info

  • 2×6 T&G YP Flooring / Ceiling

    Our 2×6 Yellow Pine T&G is a #1 grade.  Can be used for flooring or ceiling, also called roofers.  Works well in areas like barns where added strength and durability is needed.  This T&G is eased edge on the front side and flat on the back side. This paneling T&G measures 1-3/8” thick and has a 5” width […]

    More Info

  • Stacking Cedar Split-Rails

    Stacking Cedar Split-Rails made with Western Red Cedar.  Stacking rails are 10′  in length.  No holes in ground needed, but can stake for more support.  Western Red Cedar is very stable and naturally resistant to rot and decay. Promotional prices listed here for in-store and local deliveries only.  

    More Info

  • Knotty Pine Reversible Double Beaded Paneling / Ceiling

    Reversible T&G in knotty white pine.  Front face is a center and edge bead and the back face is vee’d at the edges.  This T&G can be used as Ceiling or Paneling. T&G is 3/4″ thick and available in 5-1/2″ width only.  Sold by the linear foot.  Tier discounts available starting at 150 lft.

    More Info

  • SELECT KDAT Re-dried YPT Culpeper EE Decking 5/4×6

    SELECT KDAT Re-dried YPT Culpeper EE Decking 5/4×6 measures 5/4×6 (actual 1” x 5-1/2”) and comes in 8’, 10’, 12’, 14′, 16’ and 20′ lengths.  Select grade and re-dried after treatment.  For Decking grading through Culpeper, the Select grade is a step up from Premium decking with clearer boards.  May have occasional small knots and […]

    More Info

  • Cedar Channel Rustic Siding

    Our cedar Channel Rustic Siding is made with Western Red Cedar in a Select grade with tight knots. This grade does allow for knots, but the knots should be tight and not fall out. This Channel Rustic cedar siding is reversible with a rough face on one side that creates a board and batten look. […]

    More Info

  • CDX Plywood

    An exterior grade pine plywood with a CD grade, sheathing grade.  This plywood is made with an exterior grade glue.  A more economical choice this plywood allows for knots and other imperfections on both faces.  Available in 1/2″, 5/8″ and 3/4″ thicknesses. This plywood is sold in full 4×8 sheets only.

    More Info

  • T&G YP Double 6″ Beaded Paneling / Ceiling

    Reversible T&G in clear Yellow Pine.  Front face is a center and edge bead and the back face is flat.  This T&G can be used as Ceiling or Paneling. T&G is 3/4″ thick and available in 5-1/2″ width only.  Sold by the linear foot.  Tier discounts available starting at 150 lft.

    More Info
  • Sale!

    Dog Eared Fencing Pickets

    11/16″ thick by 6″ wide and 6′ long fence pickets with a dog-earred top.  Made by Culpepper Wood Preserves and treated with copper azole (CA) with Baramine.   This is a #2 prime grade and “green” or wet.  Please allow time to dry before staining or painting.  

    $6.99
    More Info